RTD PT 100 Sensor with Head & Terminal
This rugged design offers a variety of protection heads with 1/2″ NPT mounting threads and 304SS sheath. Note that the final length dimension is reduced by 1/2″ so if used in a thermowell the sensor will not bottom and cause damage to the sensor. The standard probe uses a Style 2 (3-wire) lead configuration, but other configurations are available. All probes include a screw terminal block for easy connection of copper extension wire.
Features:
- Longer service life
- Easy to replace
- Efficient performance
Specifications :
- Rugged Design Offers a Variety of Protection Heads with 1/2 NPT Mounting Threads and a Screw-Type Terminal Block
- Fixed Length Probe: 304 SST Sheath Connected to 304 SST Hex Fitting Spring Loaded: Improved Response Time and Vibration Resistance When Used in Thermowells
- Sensors Contain 100 Ohm Class “B” DIN Platinum Thin Film Elements
- Standard 3-Wire Configurations with IEC60751/ASTM-E-1137 Color Codes (2- and 4-Wire Configurations also Available)
- Fixed Length Operating Temperature: -50 to 500ºC ; Spring Loaded Temperature Range: -50 to 500°C (-50 to 260ºC at Head)
- Fixed Length Probe Can be Used as a Direct Immersion Sensor with the Protection Head Isolating the Connections from the Outside Environment
- Optional 4 to 20 mA Transmitters Can Be Conveniently Installed . Heads will accommodate Transmitters
| RTD PT 100 Sensor with Head & Terminal – Technical Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Type | Sheath Material | Sheath O.D.(d) | Element Length | Process Connection (**) | |||
| Min Std | Max Std | Std | |||||
| Class B | SS 316 | 3/16” | 2” | 18” | 12” | 3/8” ½” ¾” BSP (M) | |
| Class B | SS 316 | 1/4″ | 2” | 36” | 12” | 3/8” ½” ¾” BSP (M) | |
| Class B | SS 316 | 8MM | 2” | 36” | 12” | 3/8” ½” ¾” BSP (M) | |
